목차
- 모델 번호가 중요한 이유
- 인서트 접두어 UC
- 장착형 유닛 접두어
- 숫자의 의미
- 일반적 접미어
- 예시와 오류
Why model numbers matter
A bearing model number is the fastest way to specify the product. Reading it correctly avoids ordering the wrong bore, housing or locking type.
For replacement work, the model number on the old unit is usually the safest single reference, supported by a photo of the installation.
Insert bearing prefix: UC
UC marks a spherical insert bearing. The digits that follow indicate the bore size group. For example, UC205 uses a 25 mm (1 inch) bore.
Mounted unit prefixes
Mounted bearing units add a housing prefix before the insert number: UCP (pillow block / P-housing), UCF (square flange / F-housing), UCFL (2-bolt oval flange / FL-housing), UCT (take-up / T-housing).
So UCP205 means a pillow block unit built around a UC205 insert. The bore is still 25 mm; only the housing type changes.
What the digits mean
In the UC/UCx numbering, the last two digits relate to the bore. A 00-01 style code maps to the bore group: 205, 305 all point to the same 25 mm bore group across the insert families.
Do not read the digits as a direct millimeter value. Always confirm bore from a size table or the product drawing.
Common suffixes
Some numbers carry a suffix such as -12, -14, -16 after the base model. These often indicate inch-based bore variants (for example 3/4 inch, 7/8 inch, 1 inch) of the same insert family.
When ordering, state the full model including any suffix, or confirm the bore in mm and inch to avoid mismatch.
Examples and mistakes
UC205 = insert bearing, 25 mm bore. UCP205 = pillow block unit with UC205 insert. UCFL205 = 2-bolt flange unit with UC205 insert.
Common mistake: assuming UC205 and UCP205 are the same product. UC205 is the insert only; UCP205 is the complete unit.
Common mounted bearing prefixes
| Prefix | Housing type | Mounting |
|---|---|---|
| UC | Insert bearing only | Fits inside a housing |
| UCP | Pillow block | Bolts to a base |
| UCF | Square flange | Bolts to a flat face |
| UCFL | 2-bolt oval flange | Bolts to a narrow side |
| UCT | Take-up | Slides for belt tension |
Example decode
| Model | Read as | Bore |
|---|---|---|
| UC205 | Insert, bore group 205 | 25 mm (1 in) |
| UCP205 | Pillow block with UC205 | 25 mm (1 in) |
| UCFL205 | 2-bolt flange with UC205 | 25 mm (1 in) |
When confirming a model
- Write the full model including suffix.
- Confirm bore in mm and inch.
- State the housing type if a unit is needed.
- Share a photo of the old unit if unclear.
핵심 요약
- UC = insert bearing; UCP/UCF/UCFL/UCT add the housing type.
- The digits indicate the bore size group, not a direct millimeter value.
- UC205 is the insert; UCP205 is the complete pillow block unit.
Frequently Asked Questions
What does UC stand for?
UC is the designation for a spherical insert bearing. The following digits indicate the bore size group.
Is UC205 the same bore as UCP205?
Yes, both use a 25 mm bore because UCP205 is a pillow block unit built around a UC205 insert.
Why do some models have a suffix like -16?
Suffixes such as -12, -14, -16 usually mark inch-based bore variants of the same insert family. Always confirm the exact bore.
귀사 시장에 필요한 베어링 유닛을 찾고 계십니까?
모델 번호, 수량, 포장 요구사항 및 도착 항구를 보내주세요.
문의 보내기